... inxi -F
...
inxi -F
Спойлер
System: Host: Dell-XT3 Kernel: 4.10.0-28-generic x86_64 (64 bit)
Desktop: Gnome 3.18.5 Distro: Ubuntu 16.04 xenial
Machine: System: Dell (portable) product: Latitude XT3 v: 01
Mobo: Dell model: 00XHM8 v: A01 Bios: Dell v: A14 date: 05/12/2017
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3200 MHz 1: 1128 MHz 2: 975 MHz 3: 945 MHz
4: 1273 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.Org 1.19.3 driver: N/A
Resolution: 1366x768@60.14hz
GLX Renderer: Mesa DRI Intel Sandybridge Mobile
GLX Version: 3.0 Mesa 17.0.7
Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.10.0-28-generic
Network: Card-1: Intel 82579LM Gigabit Network Connection driver: e1000e
IF: enp0s25 state: down mac: d4:be:d9:ff:70:5a
Card-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlp2s0 state: up mac: 3c:a9:f4:0f:19:48
Drives: HDD Total Size: 500.1GB (1.2% used)
ID-1: /dev/sda model: HGST_HTS725050A7 size: 500.1GB
Partition: ID-1: / size: 68G used: 5.8G (9%) fs: ext4 dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 43.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 208 Uptime: 7 min Memory: 1547.3/7861.0MB
Client: Shell (bash) inxi: 2.2.35
Вот для сравнения вывод Делл Е6420 (такие же экран и процессор) с Матунту Х64-116:
Спойлер
inxi -F
System: Host: Dell-Latitude-E6420 Kernel: 4.8.0-40-generic x86_64 (64 bit)
Desktop: MATE 1.16.2
Distro: Ubuntu 16.04 xenial
Machine: System: Dell (portable) product: Latitude E6420 v: 01
Mobo: Dell model: 032T9K v: A01
Bios: Dell v: A21 date: 11/14/2013
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3200 MHz 1: 1372 MHz
2: 1024 MHz 3: 1296 MHz 4: 1274 MHz
Graphics: Card: NVIDIA GF119M [NVS 4200M]
Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
Resolution: 1366x768@59.98hz
GLX Renderer: NVS 4200M/PCIe/SSE2
GLX Version: 4.5.0 NVIDIA 384.90
Audio: Card-1 NVIDIA GF119 HDMI Audio Controller
driver: snd_hda_intel
Card-2 Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel
Sound: ALSA v: k4.8.0-40-generic
Network: Card-1: Intel 82579LM Gigabit Network Connection
driver: e1000e
IF: enp0s25 state: down
mac: 5c:26:0a:6c:fa:44
Card-2: Broadcom BCM4313 802.11bgn Wireless Network Adapter
driver: bcma-pci-bridge
IF: wlp3s0b1 state: up
mac: 38:59:f9:5f:87:6e
Drives: HDD Total Size: 500.1GB (2.8% used)
ID-1: /dev/mmcblk0 model: N/A size: 15.9GB
ID-2: /dev/sda model: ST500LM021 size: 500.1GB
ID-1: / size: 41G used: 6.1G (16%) fs: ext4 dev: /dev/sda6
ID-2: swap-1 size: 6.32GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 60.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 190 Uptime: 31 min Memory: 1184.1/1955.3MB
Client: Shell (bash) inxi: 2.2.35
Вот вывод ХТ3 Матунту Z64-17.04
Спойлер
inxi -F
System: Host: dell-XT3 Kernel: 4.10.0-22-generic x86_64 (64 bit)
Desktop: MATE 1.18.0 Distro: Ubuntu 17.04
Machine: Device: laptop System: Dell product: Latitude XT3 v: 01
Mobo: Dell model: 00XHM8 v: A01 BIOS: Dell v: A14 date: 05/12/2017
Battery BAT0: charge: 26.9 Wh 90.1% condition: 29.8/40.0 Wh (74%)
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3200 MHz 1: 825 MHz 2: 812 MHz 3: 866 MHz
4: 1511 MHz
Graphics: Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
Display Server: X.Org 1.19.3 drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.14hz
GLX Renderer: Mesa DRI Intel Sandybridge Mobile
GLX Version: 3.0 Mesa 17.0.7
Audio: Card Intel 6 Series/C200 Series Family High Definition Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.10.0-22-generic
Network: Card-1: Intel 82579LM Gigabit Network Connection driver: e1000e
IF: enp0s25 state: down mac: d4:be:d9:ff:70:5a
Card-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlp2s0 state: up mac: 3c:a9:f4:0f:19:48
Drives: HDD Total Size: 500.1GB (2.0% used)
ID-1: /dev/sda model: HGST_HTS725050A7 size: 500.1GB
Partition: ID-1: / size: 125G used: 9.4G (8%) fs: ext4 dev: /dev/sda4
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 40.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 188 Uptime: 6 min Memory: 785.6/7860.9MB
Client: Shell (bash) inxi: 2.3.8
Попробовал Ubuntu Mate 17.10, управление мышкой без проблем, а вот сенсор - только кнопки "Приложения Переход Система", меню любой из них дальше - пальцами не нажимается...
inxi -F
Спойлер
System: Host: XT3 Kernel: 4.13.0-21-generic x86_64 bits: 64
Desktop: MATE 1.18.0 Distro: Ubuntu 17.10
Machine: Device: laptop System: Dell product: Latitude XT3 v: 01 serial: N/A
Mobo: Dell model: 00XHM8 v: A01 serial: N/A
BIOS: Dell v: A14 date: 05/12/2017
Battery BAT0: charge: 25.0 Wh 75.6% condition: 33.1/44.4 Wh (74%)
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3200 MHz 1: 2494 MHz 2: 2494 MHz 3: 2494 MHz
4: 2494 MHz
Graphics: Card: Intel 2nd Generation Core Integrated Graphics Controller
Display Server: x11 (X.Org 1.19.5 )
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.14hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile
version: 3.3 Mesa 17.2.2
Audio: Card Intel 6 Series/C200 Series Family High Def. Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.13.0-21-generic
Network: Card-1: Intel 82579LM Gigabit Network Connection driver: e1000e
IF: enp0s25 state: down mac: d4:be:d9:ff:70:5a
Card-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlp2s0 state: up mac: 3c:a9:f4:0f:19:48
Drives: HDD Total Size: 500.1GB (32.9% used)
ID-1: /dev/sda model: HGST_HTS725050A7 size: 500.1GB
Partition: ID-1: / size: 68G used: 7.4G (12%) fs: ext4 dev: /dev/sda2
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 47.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 183 Uptime: 1:45 Memory: 757.2/7859.5MB
Client: Shell (bash) inxi: 2.3.37
Попробовал Матунту 18.04 - проблема та же, что и выше.
inxi -F
Спойлер
inxi -F
System: Host: xt3 Kernel: 4.14.0-13-generic x86_64 bits: 64
Desktop: MATE 1.18.0
Distro: Ubuntu Bionic Beaver (development branch)
Machine: Device: laptop System: Dell product: Latitude XT3 v: 01 serial: N/A
Mobo: Dell model: 00XHM8 v: A01 serial: N/A
BIOS: Dell v: A14 date: 05/12/2017
Battery BAT0: charge: 22.7 Wh 68.8% condition: 33.1/44.4 Wh (74%)
CPU: Dual core Intel Core i5-2520M (-HT-MCP-) cache: 3072 KB
clock speeds: max: 3200 MHz 1: 2494 MHz 2: 2494 MHz 3: 2494 MHz
4: 2494 MHz
Graphics: Card: Intel 2nd Generation Core Integrated Graphics Controller
Display Server: x11 (X.Org 1.19.5 )
drivers: modesetting (unloaded: fbdev,vesa)
Resolution: 1366x768@60.14hz
OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile
version: 3.3 Mesa 17.2.4
Audio: Card Intel 6 Series/C200 Series Family High Def. Audio Controller
driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.14.0-13-generic
Network: Card-1: Intel 82579LM Gigabit Network Connection driver: e1000e
IF: enp0s25 state: down mac: d4:be:d9:ff:70:5a
Card-2: Intel Centrino Ultimate-N 6300 driver: iwlwifi
IF: wlp2s0 state: down mac: 3c:a9:f4:0f:19:48
Drives: HDD Total Size: 500.1GB (1.0% used)
ID-1: /dev/sda model: HGST_HTS725050A7 size: 500.1GB
Partition: ID-1: / size: 125G used: 4.9G (5%) fs: ext4 dev: /dev/sda4
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 48.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 180 Uptime: 1 min Memory: 387.8/7858.9MB
Client: Shell (bash) inxi: 2.3.45
Поставил стандартную Убунту 18.04 бета 1 с оф.сайта.
Лучше, чем стандартная 17.10.
Ваком по прежнему встроен.
Клавиатура улучшилась, теперь нет той нервной реакции на каждое прикосновение к экрану, но теперь когда надо - не всегда она есть... :)
по прежнему не ясно как её настроить или удалить. Однако, теперь можно или ею пользоваться или сторонней клавой OnBoard (в 17.10 встроенная мешает)
Теперь главный вопрос - как настроить имитацию нажатия правой кнопки мыши (ПКМ) для вызова меню (Копировать, Вырезать, Распаковать...)
По железу: выяснил, что сенсор в данном буке называется N-Trig
Cообщение из терминала:
Спойлер
Warning: multiple calibratable devices found, calibrating last one (N-Trig Pen eraser)
use --device to select another one.
Calibrating standard Xorg driver "N-Trig Pen eraser"
current calibration values: min_x=0, max_x=9600 and min_y=0, max_y=7200
If these values are estimated wrong, either supply it manually with the --precalib option, or run the 'get_precalib.sh' script to automatically get it (through HAL).
--> Making the calibration permanent <--
copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's)
Section "InputClass"
Identifier "calibration"
MatchProduct "!!Name_Of_TouchScreen!!"
Option "MinX" "-48"
Option "MaxX" "9641"
Option "MinY" "-38"
Option "MaxY" "7275"
Option "SwapXY" "0" # unless it was already set to 1
Option "InvertX" "0" # unless it was already set
Option "InvertY" "0" # unless it was already set
EndSection
Change '!!Name_Of_TouchScreen!!' to your device's name in the config above.